The Cat6 UTP 1-to-2 Splitter (also known as a Cat6 Ethernet splitter, 1-to-2 RJ45 splitter, or RJ45 Y-splitter) is a passive device that allows one Cat6 Ethernet cable to feed two devices by splitting the 8-wire pairs into two 4-wire connections. It’s commonly used in home or small office setups in Nairobi where you want to extend a single network drop to two nearby devices (e.g., PC + IP phone, two computers, or PC + smart TV) without running extra cable or installing a switch—great for cost-saving or quick fixes in apartments, small shops, or temporary setups.

Cat 6 UTP 1 to 2 Ethernet Splitter Adapter

• 1 Input to 2 Outputs: One RJ45 male/female input splits to two RJ45 outputs—uses pairs 1-2 and 3-6 for each connection (standard 10/100 Mbps wiring).
• Supports 10/100 Mbps Only: Works perfectly for Fast Ethernet (100 Mbps) or 10 Mbps—does NOT support Gigabit (1000 Mbps) due to limited wire pairs.
• No Power Required: Passive device—no external power adapter or switch chip needed—plug-and-play simplicity.
• Compact & Durable: Small plastic or metal housing (approx. 50–70 mm long) with RJ45 connectors—easy to hide behind desks or in wall boxes.
• T568A/B Compatible: Works with standard Ethernet wiring schemes—supports straight-through cables (most common).
• Easy Installation: Simply plug one Cat6 cable from your router/switch/wall jack into the splitter input, then connect two shorter patch cords to the outputs and your devices.
• Cable Length Consideration: Works best with short runs (up to 50–100m total from source to devices)—signal quality depends on cable quality and distance.
• Common Use Cases: Split one wall jack to PC + VoIP phone, PC + smart TV, or router to two nearby computers—saves cable runs in tight spaces.
• High Compatibility: Works with any standard Cat5e/Cat6 UTP cables and devices (routers, PCs, IP phones, cameras)—no configuration needed.
• Limitations: Both devices share the same 100 Mbps bandwidth (no full-duplex separation)—not suitable for high-bandwidth use on both devices at once.
• Great Budget Solution: Affordable alternative to installing a small switch or running extra cable—popular for quick fixes or low-bandwidth needs.
• Trusted Generic Quality: Widely available from non-branded suppliers (e.g., local Nairobi electronics shops, Jumia, or bulk importers)—prices typically range from KSh 300–800 per unit depending on build quality (plastic vs metal housing). Look for shielded versions if EMI is a concern.